Smarthome Remote Control System Producer

Introduction

ALL-100 family supports device programming for variety types of device covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, RS-MMC/MMC/SD Card etc. Most of programmable devices in DIP, SDIP, SOP, MSOP, QSOP, SSOP, TSOP, TSSOP, PLCC, QFP, CASON, QFN, MLP, MLF, BGA, CSP, SOT, DFN package types can be programmed on a DIP-48 Programming Module directly or through an appropriate ADAPTER/CONVERTER.

ALL-100 family features high-tech pin drivers to provide excellent programming capabilities at high speed, high reliability and high expansion flexibility. All pin drivers of ALL-100 family are fully programmable to meet modern programming /testing needs including newly released low voltage devices in the market. High speed USB port is provided to connect to the majority of notebook or desktop PC runs on Windows 98se/Me/2000/2003 Server.

ALL-100 can be either used as a powerful universal programmer or upgraded to be an ALL-100G Gang Programmer to work with various types of dedicated Gang Programming Modules by just adding the 4th pin driver card into ALL-100 base unit. The big brother ALL-100G4 is composed of 4 units of ALL-100G in a single box for helping production lines to achieve maximum programming capacity with minimum setup. Due to state-of-the-art design, ALL-100 family is able to satisfy your device programming needs from the very beginning engineering phase to small production stage all the way through mass production.

Features & Benefits

Wide Device Coverage – Wide rage of programmable devices from 8 pins up to 300 pins covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc. in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA etc. package types.

Excellent Performance – Utilize flexible pin drivers to get accurate waveforms, high programming speed plus over current protection, self diagnostic etc. ensures ALL-100 excellent performance.

Easy to Use – Runs on Windows. After master read or file download from PC, user only needs to select function from Menu and then press YES key on programmer to start program function. Operation is very easy.

High Expansion Flexibility – Standard DIP48 Module with over 500 ADAPTERs, 150 CONVERTERs for single site programming or various types of multi-site Programming Module can be used to ensure your capital investment retained.

High Reliability – Utilizing proven ALL-11 technology, the programming quality is getting perfect.

Get AT3-300 Automated Programming solution – Resolve your mass production programming issue at engineering stage.

Release New Device Support via Internet Weekly – Your future needs will never be neglected after purchasing.

World Wide Service – Distribution channel covers 35 countries worldwide. Your problem could be taken care anywhere around the world.

Specifications

Device Support
Pin Count : from 8 pins up to over 300 pins Device Type: covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc.
Device Contact
Default  – DIP48 ZIF socket Others – SOP, TSOP, PLCC, QFP, MLF, SDIP etc. through dedicated multi-socket Programming Modules (for ALL-100P)
Control
Controller – 16 bits high-speed controller with big sized FPGA & CPLD YES Key   – Press for operation Indicators  – GOOD LED BUSY LED
Interface Port
1x USB port.
Data Transfer Rate
USB 1.0/1.1 : 12 Mb/S USB 2.0 : 480 Mb/S
Functions
Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, Function Configuration, Self Test
Host Computer Requirements
Power
AC voltage – 100 – 240 VAC. Frequency – 50 – 60 Hz Power consumption – 0.5 A Rating
Dimension
L x W x H – 260mm x 150mm x 100mm.
Weight
4 KG.
Operating Temperature
0-40oC(32-105 oF)
Certification
CE mark
Ordering Information ALL-100 Includes 1x ALL-100 Base Unit (with 3x pin driver cards installed), 1x M1-UN-DP48 module ALL-100P Includes 1x ALL-100 Base Unit (with 4x pin driver cards installed), 1x M1-UN-DP48 module Standard Accessories 1x USB cable ( type A to type B ), driver S/W and user manual in CD-ROM Optional Accessory M1-UN-TS48 TSOP48 single socket programming module M1-UN-TS56 TSOP56 single socket programming module for ALL-100P M1-UN- BG68 BGA68 single socket programming module for ALL-100P M4-FLASH-BG48 BGA48 Flash Gang Module for ALL-100P M8-FLASH-TS48 TSOP48 Flash Gang Module for ALL-100P Others Please refer to HI-LO web site @http://www.hilosystems.com.tw